DS Series
Type 1 / Type 2 Surge Protective Device / SPD
Login for pricing
Features:
- UL 1449 Fourth Edition Listed
- 100kA – 200kA per phase ratings
- All UL required OCP & Safety Coordination included inside
- Type 1 SPDs intended for Line or Load Side of Main Disconnect
- Type 2 SPDs intended for Load Side of Main Disconnect
- 20kA Inominal (In) (most models)
- 200kA SCCRs (most models)
- UL 96A Lightning Protection Master Label compliant (@20kA In)
- Voltage Specific Design – highly configurable
- All MOV suppression elements monitored
- All Modes of Protection
Design Features
- Designed, Manufactured & Tested consistent with:
- ANSI/IEEE C62.41.1-2002, C62.41.2-2002, C62.45-2002, C62.62-2010 and C62.72-2007
- NEMA LS-1
- NEC® Article 285
- IEC 61643
- High Energy Parallel Design for Category C3 & C-High applications
- For External Mounting next to Switchgear, Motor Controls Centers or Panelboards
- Individually Fused & Thermally Protected MOVs
- Large-Block, 34mm square, 50kA MOVs
- Solid State Bidirectional Operation
Quality, Standards & Validation
- Type 1: UL 1449 Fourth Edition, CSA 22.2 No. 269.1
- Type 2 (Opt.): UL 1449 Fourth Edition, CSA No. 269.2, UL 1283
- UL file: VZCA.E491875 at www.UL.com
- RoHS-compliant
- IEC 61643
- Burn-In tested prior to shipment
- ISO 9001:2008 Quality Management System
- ISO 17025:2005 Laboratory Qualification
Installation, Operation & Maintenance Manual
Performance Specifications
Surge Capacities | L-N | L-G | N-G |
100kA Per Phase | 50kA | 50kA | 50kA |
200kA Per Phase | 50kA | 100kA | 100kA |
Physical Specifications
- Relative Humidity Range: 0 – 95% non-condensing
- Operating Frequency: 47 – 63Hz
- Peak Operating Temperature: +85°C (185°F)
- Operating Temperature: -25°C (-15°F) to +60°C (140°F)
- Weight: 5 lbs (2.3 kg)
- NEMA 4X Polycarbonate enclosure – UL 746C(f1) & UL 94-5VA
- Dimensions: 6” x 6” x 4” (152mm x 152mm x 102mm) (excluding removable mounting feet)
- Lug size: #8 – #10 AWG
- Pre-wired with 3’ (1m) of #10 AWG conductor
- Typical connection: 30A breaker
Diagnostic Monitoring
- 100% monitoring – Every MOV is monitored, incl. N-G
- Green LED Status indicator per phase
- Red LED service indicator
- Phase Loss monitoring (toggles LED & dry contacts)
- Electrically isolated circuitry ensures surges do not damage diagnostics